プログラマ専用SNS ミクプラ

コード:

	D3DPRESENT_PARAMETERS d3dpp;
	HRESULT hr;
	
	if ( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) ){
		MessageBox( hWnd , (LPCTSTR)"Can't create Direct3D." , (LPCTSTR)"Error" , MB_OK );
		return FALSE;
	}
	ZeroMemory( &d3dpp , sizeof( d3dpp ) );
	d3dpp.Windowed         = TRUE;
	d3dpp.SwapEffect       = D3DSWAPEFFECT_DISCARD;
	d3dpp.MultiSampleType=D3DMULTISAMPLE_NONE;                                                /*ここがアンチエイリアスを決めるらしい*/
	d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
	
	hr = g_pD3D->CreateDevice( D3DADAPTER_DEFAULT , D3DDEVTYPE_HAL , hWnd ,
	                           D3DCREATE_SOFTWARE_VERTEXPROCESSING ,
	                           &d3dpp , &g_pd3dDevice );

コード:

D3DPRESENT_PARAMETERS d3dpp;
LPDIRECT3D9			g_pD3D       = NULL;//グローバル

	d3dpp.BackBufferCount = 1;
	d3dpp.Windowed = TRUE;
	d3dpp.BackBufferWidth = 640;
	d3dpp.BackBufferHeight = 480;
	d3dpp.EnableAutoDepthStencil = TRUE;
	d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
	d3dpp.hDeviceWindow = hWnd;   
	d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
	d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
int test=g_pD3D->CheckDeviceMultiSampleType( 
D3DADAPTER_DEFAULT , 
D3DDEVTYPE_HAL,
d3dpp.BackBufferFormat,
d3dpp.Windowed, 
D3DMULTISAMPLE_3_SAMPLES,
NULL )
/*分からなかったので既存の設定
g_pD3D->CreateDevice( D3DADAPTER_DEFAULT , D3DDEVTYPE_HAL , hWnd ,
	                           D3DCREATE_SOFTWARE_VERTEXPROCESSING ,
	                           &d3dpp , &g_pd3dDevice );
を見て適当に設定しています
*/
	TCHAR lps[256];
	wsprintf(lps,_T("%d"),hr);
	MessageBox(hWnd,lps,_T("test"),MB_OK);

コード:

LPDIRECT3D9 g_pD3D;//グローバル

コード:

BOOL InitDirect3D( HWND hWnd )//デバイスの初期化処理
{
	D3DDISPLAYMODE        dmode;
	D3DPRESENT_PARAMETERS d3dpp;
	HRESULT hr;
	
	if ( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) ){
		MessageBox( hWnd , (LPCTSTR)"Can't create Direct3D." , (LPCTSTR)"Error" , MB_OK );
		return FALSE;
	}
	g_pD3D->GetAdapterDisplayMode(D3DADAPTER_DEFAULT, &dmode);

	ZeroMemory( &d3dpp , sizeof( d3dpp ) );
	d3dpp.Windowed = TRUE;    // ウィンドウ・モード
	d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
	d3dpp.BackBufferFormat = dmode.Format;    // デスクトップのフォーマットを使用
	d3dpp.BackBufferCount = 1;    // ダブルバッファリングを行う
	d3dpp.EnableAutoDepthStencil = TRUE;
	d3dpp.AutoDepthStencilFormat = D3DFMT_D16;    // 16Bit Zバッファ作成
	hr = g_pD3D->CreateDevice( D3DADAPTER_DEFAULT , D3DDEVTYPE_HAL , hWnd ,
	                           D3DCREATE_SOFTWARE_VERTEXPROCESSING ,
	                           &d3dpp , &g_pd3dDevice );
	if ( FAILED( hr ) ){
		MessageBox( hWnd , (LPCTSTR)"Can't create device." , (LPCTSTR)"Error0001" , MB_OK );
		return FALSE;
	}
    // テクスチャの設定
    g_pd3dDevice->SetTextureStageState(0, D3DTSS_ALPHAOP, D3DTOP_MODULATE);
    g_pd3dDevice->SetTextureStageState(0, D3DTSS_COLORARG1, D3DTA_TEXTURE);
    g_pd3dDevice->SetTextureStageState(0, D3DTSS_COLORARG2, D3DTA_DIFFUSE);
	
	// 半透明処理を行う
    g_pd3dDevice->SetRenderState(D3DRS_SRCBLEND, D3DBLEND_SRCALPHA);
	if ( FAILED( hr ) ){
		MessageBox( hWnd , (LPCTSTR)"Can't create device." , (LPCTSTR)"Error0002" , MB_OK );
		return FALSE;
	}
	D3DXCreateSprite( g_pd3dDevice , &g_pSprite );
	for(int i=0;i<SPRITE_MAX;i++)//SPRITE_MAX==5000
		D3DXCreateSprite( g_pd3dDevice , &g_Sprite[i] );
}

コード:

D3DXCreateTextureFromFileExA(
        g_pd3dDevice,					// select your d3ddevice
        File_Name,
        0,
        0,
        0,
        0,
        D3DFMT_A1R5G5B5,				// You can transparaentize color
        D3DPOOL_MANAGED,
        D3DX_FILTER_LINEAR,
        D3DX_FILTER_LINEAR,
        D3DCOLOR_ARGB(255, 0, 0,0),		// Transparentizing brack color
        NULL,
        NULL,
		&GRF_Name->TextureNeme			// Texture name
		);

コード:

//テクスチャの作成（あちらはリソースからであった）
	hr= D3DXCreateTextureFromFileEx(
        g_pd3dDevice,					// select your d3ddevice
        File_Name,
        0,
        0,
        1,
        0,
        D3DFMT_A1R5G5B5,				// You can transparaentize color
        D3DPOOL_MANAGED,
		D3DX_FILTER_NONE,
        D3DX_FILTER_NONE,
        D3DCOLOR_ARGB(255, 0, 0,0),		// Transparentizing brack color
        &srcImgInfo,
        NULL,
		&GRF_Name->TextureNeme			// Texture name
		);
    g_fTexImageWidth = 1.0f;
    g_fTexImageHeight = 1.0f;

    if (GRF_Name->TextureNeme){
        if (S_OK == GRF_Name->TextureNeme->GetLevelDesc(0,&d3dsDesc)){
            tw = srcImgInfo.Width;
            th = srcImgInfo.Height;
            g_fTexImageWidth = (float)tw;
            g_fTexImageWidth /= (float)d3dsDesc.Width;
            g_fTexImageHeight = (float)th;
            g_fTexImageHeight /= (float)d3dsDesc.Height;
        }
    }

コード:

	D3DDISPLAYMODE        dmode;
	D3DPRESENT_PARAMETERS d3dpp;
	HRESULT hr;
	
	if ( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) ){
		MessageBox( hWnd , (LPCTSTR)"Can't create Direct3D." , (LPCTSTR)"Error" , MB_OK );
		return FALSE;
	}
	g_pD3D->GetAdapterDisplayMode(D3DADAPTER_DEFAULT, &dmode);
	ZeroMemory(&d3dpp, sizeof(D3DPRESENT_PARAMETERS));
	d3dpp.BackBufferCount = 1;
	d3dpp.Windowed = TRUE;
	d3dpp.BackBufferWidth = 320;
	d3dpp.BackBufferHeight = 240;
	d3dpp.EnableAutoDepthStencil = TRUE;
	d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
	d3dpp.hDeviceWindow = hWnd;   
	d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
	d3dpp.AutoDepthStencilFormat = D3DFMT_D16;

	int tt=g_pD3D->CheckDeviceMultiSampleType( D3DADAPTER_DEFAULT , D3DDEVTYPE_HAL,
								d3dpp.BackBufferFormat, 
                                d3dpp.Windowed, D3DMULTISAMPLE_3_SAMPLES, NULL );
	TestMessage(tt);
	hr = g_pD3D->CreateDevice( D3DADAPTER_DEFAULT , D3DDEVTYPE_HAL , hWnd ,
	                           D3DCREATE_SOFTWARE_VERTEXPROCESSING ,
	                           &d3dpp , &g_pd3dDevice );
	if ( FAILED( hr ) ){
		MessageBox( hWnd , (LPCTSTR)"Can't create device." , (LPCTSTR)"Error0001" , MB_OK );
		return FALSE;
	}
    // テクスチャの設定

	g_pd3dDevice->SetRenderState( D3DRS_MULTISAMPLEANTIALIAS, FALSE );

    g_pd3dDevice->SetTextureStageState(0, D3DTSS_ALPHAOP, D3DTOP_MODULATE);
    g_pd3dDevice->SetTextureStageState(0, D3DTSS_COLORARG1, D3DTA_TEXTURE);
    g_pd3dDevice->SetTextureStageState(0, D3DTSS_COLORARG2, D3DTA_DIFFUSE);
    g_pd3dDevice->SetTextureStageState( 0,(D3DTEXTURESTAGESTATETYPE)D3DSAMP_MIPFILTER,D3DTEXF_NONE );
    g_pd3dDevice->SetTextureStageState( 0,(D3DTEXTURESTAGESTATETYPE)D3DSAMP_MAGFILTER,D3DTEXF_NONE );
    g_pd3dDevice->SetTextureStageState( 0,(D3DTEXTURESTAGESTATETYPE)D3DSAMP_MINFILTER,D3DTEXF_NONE );